ResMed AirFit N10 For HER Nasal CPAP / BiPAP Mask – Small
$109.00
ResMed AirFit N10 For HER Nasal CPAP / BiPAP Mask.
2021 Discontinued
NOTE*** A newer Nasal Mask is available – BreathWear YN-03 Nasal CPAP / BiPAP Mask.
Qualifies for HSA & FSA
Safe & Secure Checkout
24/7 Customer Support
Out of stock
2021 Discontinued
NOTE*** A newer Nasal Mask is available – BreathWear YN-03 Nasal CPAP / BiPAP Mask.
The ResMed AirFit N10 For HER Nasal CPAP / BiPAP Mask (Small Headgear /Small Cushion) covers the nose only and it’s designed specifically for women with smaller, more petite CPAP mask features.This is a minimal contact CPAP mask designed to make a more comfortable fit with less invasive headgear straps and the all new magnetic headgear clips that make wearing your mask a breeze. When it came to designing nasal masks for women the overall size of the cushion and the headgear are priority because too many times the smallest mask on the market was still too large for some women. There is no forehead support on the N10 For HER frame, leaving the line of sight clear.
Note: The short tube is permanently attached to the frame and cannot be removed.
Key Features:
- Magnetic Headgear Clips: The AirFit™ N10 For Her features innovative headgear clips with built-in magnets, making it simple to add or remove the headgear from the frame. The clips have a lip on one side to keep the magnets from sliding off while the mask is in use.
- Small – Dual-Wall Cushion: The AirFit™ N10 For Her includes Small size cushion. The dual-wall design offers support and stability to promote a proper seal as movement occurs during sleep.
- Frame with Soft Wraps: Soft wraps are included to help avoid red marks.
- Pink Soft Edge Headgear: Included with the AirFit™ N10 For Her is headgear with ResMed’s Soft Edge design which gives comfort while reducing red marks. The headgear’s outer side is gray, while the inner side is a soft pink.
- Circular Exhalation Venting: The exhalation ports of the AirFit™ N10 For Her form a circle on the frame, allowing air to be directed in multiple directions as to not disturb bed partners or the user. Multiple exhalation ports allow for quiet operations.
In the box:
- (1) AirFit™ N10 for Her Nasal CPAP Mask Frame
- (1) Small Cushion
- (1) Pair of Magnetic Clips
- (1) Short Tube Assembly
- (1) Pair of Soft Wraps
- (1) Headgear – Small (Gray & Pink)
| Nasal Type | Covers Nose, For Her |
|---|---|
| Size or Type | Extra Small, Medium, Small |
Replacement Parts
Mask Cushions/Pillows
Fitting Guide
ResMed AirFit N10 for HER Nasal Mask
• Ensure the grey side of the headgear that shows the ResMed and AirFit N10 logos, is facing outwards.
• Disconnect lower straps. Line up the bottom of the cushion with the bottom of the nose.
• Place the cushion over the nose.
• Hold the mask against the face.
• Pull the headgear up and over the head.
• Bring the lower straps below the ears and attach the EasyClick clips to the outside of the frame.
• Undo the upper fastening tabs.
• Adjust the straps evenly until the mask sits comfortably just under the nose and then reattach the fastening tabs, so that they align with the upper straps.
• Undo the fastening tabs on the lower straps. Adjust both of the straps evenly until the mask is stable then reattach tabs.
• Connect the mask tubing to the air tubing attached to the device.
• Turn on the device so it blows air.
• Adjust the cushion and headgear until the mask sits comfortably on the nose and is not creased or twisted.
• The mask is now ready to use.
• The patient can position the lower part of the headgear over or under their hair to suit their hairstyle preference.
• Optional soft sleeves may be assembled for enhanced comfort on the cheeks
You may also like…
