ResMed AirFit™ N10 Nasal CPAP / BiPAP Mask with Headgear
$89.00
ResMed AirFit™ N10 Nasal CPAP / BiPAP Mask with Headgear
Qualifies for HSA & FSA
Safe & Secure Checkout
24/7 Customer Support
The ResMed AirFit™ N10 Nasal CPAP / BiPAP Mask with Headgear delivers effortless performance, comfort, and visual freedom, in a user friendly design. The AirFit N10 is simple and intuitive for patients to fit and comfortable to wear, with an under-eye frame providing a clear line of sight.
Features:
- EasyClick self aligning headgear clips, it’s easy to use and reassemble.
- The modified dual wall Spring Air™ cushion delivers a comfortable, high performance seal.
- The SoftEdge™ headgear features slimmed down straps for greater comfort and fewer facial marks.
- Circular diffused venting gently directs exhaled air away for a peaceful sleeping environment.
- Magnetic Headgear Clips
- SoftWraps Included
- Quiet Ventilation
- Soft Mask Cushions
- Doesn’t impede line of sight
- visual Freedom allows you to watch TV or wear glasses
In the Box:
- (1) Cushion
- (1) Frame
- (1) Headgear
- (1) A pair of soft wraps
| Size or Type | For Her, Small, Standard, Wide |
|---|---|
| Cushion Type | Silicone |
| Sizing Needs | Wide Face |
| Nasal Type | Covers Nose |
Replacement Parts
Brochure
Fitting Guide
Fitting and Adjusting your AirFit N10 CPAP Mask
• Ensure the grey side of the headgear that shows the ResMed and AirFit N10 logos, is facing outwards.
• Disconnect lower straps. Line up the bottom of the cushion with the bottom of the nose.
• Place the cushion over the nose.
• Hold the mask against the face.
• Pull the headgear up and over the head.
• Bring the lower straps below the ears and attach the EasyClick clips to the outside of the frame.
• Undo the upper fastening tabs.
• Adjust the straps evenly until the mask sits comfortably just under the nose and then reattach the fastening tabs, so that they align with the upper straps.
• Undo the fastening tabs on the lower straps. Adjust both of the straps evenly until the mask is stable then reattach tabs.
• Connect the mask tubing to the air tubing attached to the device.
• Turn on the device so it blows air.
• Adjust the cushion and headgear until the mask sits comfortably on the nose and is not creased or twisted.
• The mask is now ready to use.
• The patient can position the lower part of the headgear over or under their hair to suit their hairstyle preference.
• Optional soft sleeves may be assembled for enhanced comfort on the cheeks
1 review for ResMed AirFit™ N10 Nasal CPAP / BiPAP Mask with Headgear
You may also like…
BPA-FREE Masks
FitPack Masks
Philips Respironics DreamWisp Nasal CPAP / BiPAP Mask with 2 Magnetic Clips -FitPack (S, M, L)
This mask is the one for me!