ResMed AirFit™ F20 Full Face CPAP / BiPAP Mask with Headgear
$149.00
The technologically advanced Resmed Airfit f20 full-face mask is the perfect match for 97% of patients. It is designed to fit a wide range of face shapes and sizes because of its adaptable wings. The mask sits low beneath the eyes and maximizes comfort with plush headgear, quick-release elbow, and the InfinitySeal cushion.
Free Shipping Nationwide
BBB Accredited
Secure Checkout
Customer Support
- Description
- Additional information
- Specifications
- Brochure
- Fitting Guide
- FAQ's
- Reviews (13)
- Parts & Accessories
The ResMed AirFit™ F20 Full Face CPAP / BiPAP Mask with Headgear is the very first to feature the revolutionary ResMed UltraSoft™ memory foam cushion. Conforming to the unique contours of each face, this memory foam cushion is designed to deliver a light, breathable fit while working across a range of therapy pressures. The AirTouch™ F20 frame is compatible with the AirFit™ F20’s InfinitySeal™ cushion, and includes magnetic clips to quickly guide the headgear into the frame, and a quick-release elbow to disconnect the mask tubing without taking off the mask. In a study, the AirTouch F20 fit 98% of patients.
Key Features
- InfinitySeal cushion: This revolutionary cushion is designed with variable thickness and stays sealed at any given airflow pressure setting and movements during sleep. So, this cushion will adapt no matter which CPAP therapy session you use.
- Plush headgear: Thanks to this feature, the Resmed Airfit f20 full face mask is extremely stable and soft. You can enjoy your comfortable treatment with extra softness, plush straps, and a flexible frame.
- Quick-release elbow: You have the complete control over disconnecting and reconnecting the Resmed Airfit f20 full face mask. The quick-release elbow feature lets you wake up and disconnect from therapy without taking the mask off. This allows you to control the therapy without disrupting the mask.
- Magnetic clips: These connect the lower headgear straps the cushion base. With two simple snaps, you can easily take the mask off without worrying about the fit getting disturbed. This feature makes the Resmed Airfit f20 full face mask quick to use and convenient.
- Open visibility design: The Resmed Airfit f20 full face mask sits low on the face, covering only the nose and the mouth without forehead straps. The frame of the mask connects to the headgear near the ears. With this feature, you can catch up on some reading or favorite television shows before your sleep therapy.
- Quiet Air vent: The elbow extends from an attachment connecting to the opening in the InfinitySeal cushion. It is lined with holes to let the sound of the air exit from the mask. The mask allows for a quiet and peaceful sleeping environment during your CPAP treatment
In the box:
- (1) Headgear
- (1) Frame
- (1) Cushion
- (2) Clips
- (1) Swivel /Elbow
| Size or Type | Large, Medium, Small |
|---|---|
| Cushion Type | Silicone |
| Full Face Type | Covering Mouth & Nose |
Specifications
Headgear Dimensions (Upper Straps): 6 in L
Headgear Dimensions (Lower Straps): 11.75 in L
Headgear Weight: 0.93 oz
Cushion Dimensions (Large): 4.75 in L x 3.25 in W x 2.5 in H
Cushion Weight (Large): 1.50 oz
Mask with Headgear Weight: 4.19 oz
Mask without Headgear Weight: 3.26 oz
Material Components (Cushion Assembly): Silicone Elastomer and Polycarbonate
Material Components (Elbow Assembly): Polyamide, Silicone Elastomer, Polycarbonate, and Polybutylene Terephthalate
Material Components (Frame Assembly): Polyester Elastomer, Polycarbonate, Nylon/Elastane, and Metal Plated Magnet
Material Components (Headgear): Nylon/Elastane, Polyurethane, and Polyamide
Material Components (Headgear Clip): Polycarbonate and Metal Plated Magnet
Fitting Guide
ResMed AirFit F20 Full Face CPAP Mask Template
Fitting and Adjusting your AirFit F20 Full Face CPAP Mask.
- Twist and pull both magnetic clips away from the frame.
- Ensure that the ResMed logo on the headgear is facing outwards and is upright. With both lower headgear straps released, hold the mask against your face and pull the headgear over your head.
- Bring the lower straps below your ears, and attach the magnetic clip to the frame.
- Undo the fastening tabs on the upper headgear straps. Pull the straps evenly until the mask is stable and positioned as shown in the illustration. Reattach the fastening tabs.
- Undo the fastening tabs on the lower headgear straps. Pull the straps evenly until the mask is stable and sits comfortably on the chin. Reattach the fastening tabs.
- Connect the device air tubing to the elbow. Attach the elbow to the mask by pressing the side buttons and pushing the elbow into the mask, ensuring it clicks in on both sides.
- Your mask and headgear should be positioned as shown in the illustration. Adjustment If necessary, slightly adjust the position of the mask for the most comfortable fit.
- Ensure that the cushion is not creased and the headgear is not twisted.
- With air pressure applied, pull the mask away from your face to allow the cushion to inflate and reposition onto your face.
- To resolve any leaks at the upper part of the mask, adjust the upper headgear straps. For the lower part, adjust the lower headgear straps.
- Adjust only enough for a comfortable seal. Do not over-tighten as this may cause discomfort.
FAQ's
- What are the headgear and cushion dimensions?
The upper straps of the headgear are 6 inches long while the bottom straps are 11.75 inches in length. The large cushion is 4.75 inches in length, 3.25 inches in width, and 2.5 inches in height. The headgear weighs 0.93 oz, and the large-sized cushion weighs 1.50 oz. - What is the material used to make the cushion, and is it safe?
The InfinitySeal cushion is made up of Silicone Elastomer and Polycarbonate. The hypoallergenic material is soft light giving you restful sleep during your CPAP treatment. The material used for making the Resmed Airfit f20 full face mask safe and comfortable to use. - Can you use the ResMed AirFit F20 full face mask with any CPAP machine?
Yes, the Airfit f20 full face mask can be used with any CPAP machine which the patient chooses. - Do you need to clean the mask parts and replace them?
Yes, the mask parts require proper care and cleaning. They should be cleaned in warm water and mild soap or detergent. Allow them to air dry. It would be best if you cleaned the cushion, short tube, and elbow daily, whereas you can clean the headgear every week. If not cleaned regularly, the mask parts get affected by the oil and dirt on the face. So, you should replace the parts on a consistent schedule. - Where do I find the correct fit for me?
It is essential that you find the perfect fit. The one size frame fits everyone while the cushion is available in small, medium, and large sizes. These sizes are indicated below the round opening on the Infinityseal cushion. - Are there any precautions to keep in mind?
Yes, there are a few precautions to remember while using this full face CPAP mask. The mask contains magnets and must be kept away from any medical implants which may get affected due to it. The mask should not be cleaned with an ozone device as it may discolor the Airfit f20 full face mask.
13 reviews for ResMed AirFit™ F20 Full Face CPAP / BiPAP Mask with Headgear
Add a review
Mask Cushions/Pillows
Replacement InfinitySeal™ Cushion for ResMed AirFit & AirTouch F20 Full Face Mask
You may also like…
Full Face Masks
ResMed Mirage Quattro™ Full Face CPAP /BiPAP Mask with Headgear
Fisher & Paykel
Fisher and Paykel Vitera Full Face CPAP / BiPAP Mask with Headgear FitPack (S, M, L)
Full Face Masks
ResMed AirFit F30i Full Face CPAP / BiPAP Mask with Headgear
Michael –
I have tried many of the full-face masks available. I’ve not been happy with many of the masks I tried, probably because I sleep on my side – I think that makes it even harder to get a good mask seal. I really wanted to like the hybrid masks (under the nose style) but I couldn’t get them to stop leaking. And of the masks that I could use, I find the AirFit F20 works best for me. The mask stays in place and seals very well. The hose attachment swivels effortlessly, and the air flow out of the mask is diffuse and silent. The cushion is easy to clean and replace, and I like the straps and fittings.
Alex –
If you have read my previous reviews on the N20, here is the latest on this mask. I switched to this mask due to me developing issues with sleeping with my mouth open. I tried chin straps and found them uncomfortable and restricting. Since I am a huge fan of the N20, nasal mask, I decided on the F20. full face version. My first couple of nights were difficult as I have been using a nasal mask for almost 15 years. After that adjustment period, I found that my only issues were with getting the right tightness on the straps. Although the straps are a little tighter than my previous mask, I now have 0 leaks. My AirSense 10 is now showing 100 points every night. This is the first time that I have been able to get that. I wanted to express my sincere “Thank You” to everyone at The Cpap Shop for sticking with me to get this right. They are the best!
Greta –
Best mask I found for comfort. Straps wear out fast and do not hold during sleep. After a short period you have to tighten so tight to keep it from leaking it hurts. Fix the VELCRO and it would be much better.
Jack –
I don’t usually write reviews but the only review on this site was super negative. I didn’t think it was that bad. I don’t think there will ever be a perfect full face mask but this was the best I’ve ever had. I find with all the full face masks I’ve tried that you have to really cinch down the straps to limit/stop the leaks. This can cause you to have a minor sore spot on the bridge of your nose and of course stap marks. This is the first mask I’ve had that doesn’t leak and you know what that means, a good sleep! I’ll take the minor and temporary nose irritation until they have improved this issue.
John –
I think I’ve tried almost every mask and the AirFit F20 is the most comfortable yet. It’s not necessary to tighten it to prevent air leaks. I use up to 22 cm of pressure. There’s an air leak most nights of 5 L or less, but this mask doesn’t make the farting sound as others do. It’s a very quiet mask overall; almost silent. I don’t get any skin irritation at the bridge of the nose. I think this may be the perfect mask for me.
Nicholas –
Most comfortable quite mask I have tried. No hassle, perfect seal even with my beard. Lasts a long time. Can’t say enough positive things about this mask.
Oliver –
I have paid out of pocket for over 2 years trying to find a mask that I could live with, and I finally did! Received yesterday and it was so simple to operate and find that fit that isn’t pinching your face off, or giving you neck pain. I hated to take it off. My horrible allergies were better today, and my energy level was up. I am going to order another to keep on hand. This is also a good company to deal with!
Kevin –
I have tried on several masks, but this one is the most comfortable so far. I really love the simplicity of magnetic clippings. It so nice to find a mask that is so quiet and fits well. It stays where it needs to. Thanks CPAP Store guys for helping me out to find the perfect fit for me.
Ephriam Johnson (verified owner) –
Patrick Canning (verified owner) –
Ephriam Johnson (verified owner) –
The box was a little damaged due to putting in a bag vs box, but no other issues.
Keith Miler –
Great mask very comfy wonderful service and fast shipping thank
Loyd (verified owner) –