ResMed AirFit™ F20 for Her Full Face CPAP / BiPAP Mask with Headgear
$155.00
ResMed AirFit™ F20 for Her Full Face CPAP / BiPAP Mask with Headgear
NOTE*** A newer and similar Full Face Mask is available – Yuwell BreathWear YF-02 Full Face CPAP / BiPAP Mask.
Qualifies for HSA & FSA
Safe & Secure Checkout
24/7 Customer Support
NOTE*** A newer and similar Full Face Mask is available – Yuwell BreathWear YF-02 Full Face CPAP / BiPAP Mask.
The ResMed AirFit™ F20 for Her Full Face CPAP / BiPAP Mask with Headgear uses innovative features to provide superior comfort and treatment. The F20 for Her mask is designed specifically for women — it features smaller sizes that are more comfortable for a woman’s face. The mask also is available with lavender highlights and smaller features. The silicone InfinitySeal Cushion provides effective support and comfort, adapting to sleep movements. Enjoy a mask with remarkable comfort features and the effectiveness you rely on.
Features and Benefits:
- Plush Headgear keeps the mask stable while keeping you comfortable
- InfinitySeal Cushion is made of flexible silicone to maintain a tight seal as you move throughout the night — no matter what setting you use
- Magnetic clips enable you to easily attach and detach the headgear from the mask
- Quick-Release Elbow allows you to easily disconnect the mask from the tubing if you need to get up during treatment
- Diffusing Vent successfully minimizes noise by evenly dispersing air out of the mask
- Flexible Frame design fits nearly all patients by resting beneath the eye area.
In the box:
- (1) Headgear
- (1) Frame
- (1) Cushion
- (2) Clips
- (1) Swivel /Elbow
| Size or Type | Medium, Small |
|---|---|
| Cushion Type | Silicone |
| Full Face Type | Covering Mouth & Nose, For Her |
Replacement Parts
Masks Without Headgear
Fitting Guide
ResMed AirFit F20 Full Face CPAP Mask Template
Fitting and Adjusting your AirFit F20 Full Face CPAP Mask.
- Twist and pull both magnetic clips away from the frame.
- Ensure that the ResMed logo on the headgear is facing outwards and is upright. With both lower headgear straps released, hold the mask against your face and pull the headgear over your head.
- Bring the lower straps below your ears, and attach the magnetic clip to the frame.
- Undo the fastening tabs on the upper headgear straps. Pull the straps evenly until the mask is stable and positioned as shown in the illustration. Reattach the fastening tabs.
- Undo the fastening tabs on the lower headgear straps. Pull the straps evenly until the mask is stable and sits comfortably on the chin. Reattach the fastening tabs.
- Connect the device air tubing to the elbow. Attach the elbow to the mask by pressing the side buttons and pushing the elbow into the mask, ensuring it clicks in on both sides.
- Your mask and headgear should be positioned as shown in the illustration. Adjustment If necessary, slightly adjust the position of the mask for the most comfortable fit.
- Ensure that the cushion is not creased and the headgear is not twisted.
- With air pressure applied, pull the mask away from your face to allow the cushion to inflate and reposition onto your face.
- To resolve any leaks at the upper part of the mask, adjust the upper headgear straps. For the lower part, adjust the lower headgear straps.
- Adjust only enough for a comfortable seal. Do not over-tighten as this may cause discomfort.
You may also like…
Full Face Masks
ResMed AirFit F30i Full Face CPAP / BiPAP Mask with Headgear
