ResMed Quattro™ Air Full Face CPAP / BiPAP Mask with Headgear
$74.99
ResMed Quattro™ Air Full Face CPAP / BiPAP Mask with Headgear
Qualifies for HSA & FSA
Safe & Secure Checkout
24/7 Customer Support
The ResMed Quattro™ Air Full Face CPAP / BiPAP Mask with Headgear is the lightest full face masks on the market. It is lighter, sleeker, less bulky and builds on the proven reliability and performance of the Quattro™ Series for a more comfortable therapy experience. With four simple parts, assembly and cleaning are hassle-free. The SpringAir™ cushion reduces pressure often felt on the face with full face masks while maintaining a tight seal.
Key Features
- 45% lighter than the Mirage Quattro
- Flex-wing forehead support is light and comfortable
- SoftEdge headgear uses rolled-edge fabric for optimal comfort
- Assembly and cleaning are made easy with four easy to disassemble pieces
- One piece elbow with squeeze tabs make attaching and detaching easy
- Headgear attachment is easy with loops
In the Box:
- (1) Mask Frame
- (1) Cushion
- (1) Elbow /Swivel
- (1) Headgear
| Size or Type | Large, Medium, Small |
|---|---|
| Cushion Type | Silicone |
| Full Face Type | Covering Mouth & Nose, Forehead Support |
Replacement Parts
Mask Headgears
Fitting Guide
ResMed Quattro Air Full Face CPAP Mask Template
Fitting and Adjusting Quattro Air for Her Full Face Mask
- Remove the elbow from the mask by pressing in the side buttons and pulling it away. Make sure that both lower headgear straps are released.
- Ensure the base of the cushion sits in the crease of the chin and swing the mask towards the nose, then pull the headgear over the head.
- Adjust both straps of the upper headgear evenly until the mask is stable.
- Bring the lower straps below the ears and loop the headgear into the lower hooks on the frame.
- Adjust the lower headgear straps evenly until the mask is stable.
- The fitting should be firm yet comfortable. Do not over-tighten
- Connect the air tubing from the device to the elbow.
- Attach the elbow to the mask by pressing the side buttons and pushing the elbow into the mask.
- Turn on your device so it blows air.
- Now lie down to make any final adjustments if required.
- You can lift the mask away from the face a short distance, then put it back in position. Ensure the lower part of the cushion sits in the crease of the chin.
- Undo the fastening tabs on the upper headgear straps. Reposition both the straps evenly, only enough until a seal is achieved, then reattach the tabs.
- The mask is now ready to use.
3 reviews for ResMed Quattro™ Air Full Face CPAP / BiPAP Mask with Headgear
You may also like…
Full Face Masks
ResMed AirFit™ F20 Full Face CPAP / BiPAP Mask with Headgear
Full Face Masks
It’s exactly what I wanted and fits perfectly. I would order again.
Super Light weight
My doctor preferred I get a full face mask. From my personal experience, I don’t normally like using these types of masks. Though the Quattro Air is what really caught my eye. Very comfortable and fits perfectly.